Unique functional layer
Water and wind tightness
Resistance to UV rays and heat
Durability and scientific progress

Tyvek® Supro + Tape, 1,5 m x 50 m, 75 m²

A two-layer breathable membrane with integrated adhesive tape for roofs and walls

Product information

DuPont™ Tyvek® Supro + Tape – a two-layer breathable membrane with integrated adhesive tape for roofs and walls

Advanced manufacturing technology creates a product with exceptional properties: completely windproof and waterproof, yet highly vapor-permeable. Tyvek® products are distinguished by an exceptionally thick functional layer, which ensures the durability and longevity of the film. The membrane is laid directly on the thermal insulation, leaving no additional air gap.

Application:

Tyvek® Supro + Tape is a mechanically very strong, two-layer membrane with the thickest Tyvek® functional layer (220 microns) and polypropylene laminate. It is suitable for all types of roof structures where maximum durability and longevity are required. The integrated adhesive tape ensures a tight bond between the film overlaps, creating a seamless and watertight roof structure.

It is recommended for use on low-slope roofs.

Tyvek® Supro + Tape is the optimal solution when looking for a top-level, strong Tyvek® breathable membrane.

Technical data:

Name: 2506B Tyvek® Supro + Tape
Composition: HD-PE & PP (high-density polyethylene with polypropylene)

Technical Specifications

Dimensions	TYVEK® SUPRO+tape 1,5 m x 50 m =75 m²
Water vapor permeability (Sd)	0.03 m
Functional layer thickness	220 µm
Material thickness	148 g/m²
Water resistance	Class W1
Fire resistance	Flammability class E
UV stabilization	4 months
Temperature range of use	-40 °C to +100 °C
Tensile strength (longitudinal)	345 N/5 cm
Tensile strength (transverse)	290 N/5 cm
Nail tear resistance (longitudinal)	175 N
Nail tear resistance (transverse)	175 N

Complies with the requirements of LST EN 13859-1:2005 + A1:2009 “Flexible waterproofing membranes. Definitions and characteristics of underlayments. Part 1. Underlayments for discontinuous roof coverings” and its Annex ZA.

Manufactured by DuPont, Luxembourg

What is a windproof membrane and how does it differ from a roof diffusion membrane?

A windproof membrane is a breathable (diffusion) material compliant with EN 13859-2, suitable for the waterproofing of wall structures. Important: A membrane compliant only with EN 13859-2 can be used exclusively in wall structures. If the material complies with both EN 13859-1 and EN 13859-2, it can be used in both wall and roof structures.

What is the function of a diffusion membrane?

Its main function is waterproofing—protecting wooden wall or roof structures from external moisture. Additional functions: protection against wind penetration into the insulation layer and removal of internal moisture through diffusion.

What are the advantages of using diffusion membranes in roof and wall structures compared to non-breathable materials?

Diffusion membranes allow for more flexible design solutions, the use of soft thermal insulation materials, and provide 100% protection against rain and wind.

What are three-layer diffusion membranes? Their structure, advantages, and disadvantages?

They are a type of breathable membrane made of 3–4 layers with specific functions. Typically: two protective spunbond layers + one very thin polyethylene functional layer. Advantages: low market price, good mechanical strength during installation. Disadvantages: short lifespan due to thin functional layer, poor temperature resistance under metal cladding, weak vapor permeability.

What are the key parameters to consider when choosing a diffusion membrane?

Water resistance class (W1)
Thickness of the functional layer (the thicker, the better)
Temperature and UV resistance
Vapor permeability (Sd value)
Additional: tensile strength, manufacturer’s warranty.

What is the Sd value?

The equivalent air layer thickness of water vapor resistance (in meters). Lower Sd → more vapor permeability, higher breathability. Higher Sd → stronger vapor barrier. Typical Sd: diffusion membranes 0.015–0.07 m; vapor barriers 2–2000 m.

What does water column height indicate?

It shows the amount of water a membrane can withstand on its surface. New membranes: 0.8–6 m. More important: durability after natural or artificial aging.

What is the minimum water column height for diffusion membranes?

According to EU standards, to achieve W1 class, a membrane must withstand 20 cm water column for 2 hours.

Why must membranes for roofs and walls be UV resistant?

UV rays degrade polyethylene and polypropylene layers, especially the thin functional layer, causing cracks and loss of waterproofing.

How to protect membranes from harmful UV effects?

Choose high-quality, certified materials with warranty. Cover membranes quickly after installation to avoid prolonged sun exposure.

Does overall thickness affect the quality of a diffusion membrane?

No. Only the thickness of the functional layer affects durability. Overall thickness mainly determines mechanical strength.

What is the functional layer?

It is the active layer responsible for functionality: blocks water and wind, allows vapor passage.

What is the typical thickness of the functional layer in diffusion membranes?

Multi-layer membranes: 11–45 µm. Tyvek membranes: two functional layers, 175–220 µm each.

Kõike polegi vaja ise teada. KKK

Vastused korduma kippuvatele küsimustele aluskatete ja tihendusteipide ja muude toodete kohta

What is the durability of diffusion membranes?

Studies (2018) show: standard multi-layer membranes last 6–9 years. Tyvek membranes remain functional for 20+ years. Study link

Should diffusion membranes be taped?

Yes. Taping ensures a continuous, airtight wall or roof structure. Insulation performs best when dry and sealed.

Can 200-micron polyethylene film be used for sealing?

No. Thickness in microns is irrelevant. Key parameter: Sd value (recommended ≥10–13 m). Also check: a) CE certification b) Airtightness tests c) Durability (15–20 years warranty recommended) d) Low elasticity (for proper installation) e) Fire class (A2 class membranes now available).

Are all sealing tapes the same?

No. They differ in carrier layers and adhesive formulas. Since tapes are not CE-certified, choose branded products with ≥10 years warranty.

How to choose a quality vapor barrier membrane?

Low elasticity
CE and EN 13984 certification
Fire resistance ≥ E class
Temperature resistance –40 °C to +80 °C
Zero air permeability (Bendtsen method)
Durability after artificial aging.

How to choose a quality sealing tape?

Check:

Versatility of application
UV resistance
Operating temperature range
Warranty.

Are all flexible sealing foams the same

No. They differ in composition and technology. Example: DuPont Insta Stik Flex+ with patented technology, airtight, usable without inner tape (with DuPont DUO system). Only DuPont offers up to 25-year warranty for foams.

Can windows be sealed with mastic?

Yes. When choosing mastic, check:

UV resistance (≥5–6 months)
Paintability/plaster compatibility
Airtightness
Certification and durability tests
Warranty.

Is smart vapor control suitable for my home? Will it let vapor through?

Yes, for standard residential houses it is ideal. Not suitable for very humid rooms (e.g. sauna, pool).

Are all reflective membranes the same?

No. For maximum benefit, choose products with:

Sd value ≥1500 m
Emissivity ≤0.05 (lower value = higher heat reflection, e.g. 0.05 = reflects up to 95% heat).