Unique functional layer
Water and wind tightness
Resistance to UV rays and heat
Durability and scientific progress
Tyvek® WindowTape 150 mm x 25 m
Tyvek® single-sided adhesive plasterable tape is designed for sealing windows, doors, and various openings in the exterior structure of buildings.
Product information
Single-sided adhesive sealing tape for windows and doors – plasterable, wind and water tight.
Name: 1310PT Tyvek® WindowTape 150 mm x 20 m
Material composition: moisture-adaptive PET/PA non-woven film
Product use:
Tyvek® single-sided adhesive plasterable tape is designed for sealing windows, doors, and various openings in the exterior structure of buildings. It is also suitable for connecting vapor barrier films to solid wall structures. Thanks to its moisture-adaptive base, the tape is suitable for both interior and exterior applicatons. The product is completely impervious to water and wind, resistant to aging, and adheres reliably to non-woven materials, plastic, laminated films, wood, and concrete surfaces.
Storage and installation conditions:
- The surface must be dry and clean (free of dust, grease, solvents).
- Recommended for use at temperatures above 0 °C.
- For greater adhesion, it is recommended to use an additional primer.
- Easy to install thanks to the release strip.
- Store in the original packaging in a clean and dry environment at a temperature between +5 °C and +25 °C, protected from direct sunlight.
- In areas exposed to direct sunlight, the tape must be covered no later than after 3 months.
Technical Specifications
| Dimensions | 150 mm x 25 m |
| Color | White |
| Thickness | 400 µm |
| Weight | 300 g/m2 |
| Temperature range of use | -40 °C to +100 °C |
| Installation temperature | >0 °C |
| Water vapor permeability (Sd) | From 0.5 to 8 m |
| Tensile strength | 40 N/cm |
| Elasticity before breaking | 15% |
Manufactured by DuPont, Luxembourg
Similar products
-
1310PT Tyvek® WindowTape 80 mm x 25 m
Single-sided adhesive sealing tape for windows and doors - plasterable, wind and water tight. -
Tyvek® butyl tape – double-sided adhesive sealing tape 20 mm x 30 m
High-quality double-sided adhesive tape made of synthetic rubber, covered with protective paper. Designed for ... -
Roof flashing adhesive tape Tyvek® 60 mm x 20 m
Single-sided adhesive roof flashing tape for sealing rain-proof roof openings on pitched roofs. -
Tyvek® Metallised Tape 75 mm x 25 m
Single-sided adhesive metallised tape is designed to join all Tyvek® metallised films together and repair dama...
What is a windproof membrane and how does it differ from a roof diffusion membrane?
A windproof membrane is a breathable (diffusion) material compliant with EN 13859-2, suitable for the waterproofing of wall structures. Important: A membrane compliant only with EN 13859-2 can be used exclusively in wall structures. If the material complies with both EN 13859-1 and EN 13859-2, it can be used in both wall and roof structures.
What is the function of a diffusion membrane?
Its main function is waterproofing—protecting wooden wall or roof structures from external moisture. Additional functions: protection against wind penetration into the insulation layer and removal of internal moisture through diffusion.
What are the advantages of using diffusion membranes in roof and wall structures compared to non-breathable materials?
Diffusion membranes allow for more flexible design solutions, the use of soft thermal insulation materials, and provide 100% protection against rain and wind.
What are three-layer diffusion membranes? Their structure, advantages, and disadvantages?
They are a type of breathable membrane made of 3–4 layers with specific functions. Typically: two protective spunbond layers + one very thin polyethylene functional layer.
Advantages: low market price, good mechanical strength during installation.
Disadvantages: short lifespan due to thin functional layer, poor temperature resistance under metal cladding, weak vapor permeability.
What are the key parameters to consider when choosing a diffusion membrane?
- Water resistance class (W1)
- Thickness of the functional layer (the thicker, the better)
- Temperature and UV resistance
- Vapor permeability (Sd value)
- Additional: tensile strength, manufacturer’s warranty.
What is the Sd value?
The equivalent air layer thickness of water vapor resistance (in meters).
Lower Sd → more vapor permeability, higher breathability.
Higher Sd → stronger vapor barrier.
Typical Sd: diffusion membranes 0.015–0.07 m; vapor barriers 2–2000 m.
What does water column height indicate?
It shows the amount of water a membrane can withstand on its surface. New membranes: 0.8–6 m. More important: durability after natural or artificial aging.
What is the minimum water column height for diffusion membranes?
According to EU standards, to achieve W1 class, a membrane must withstand 20 cm water column for 2 hours.
Why must membranes for roofs and walls be UV resistant?
UV rays degrade polyethylene and polypropylene layers, especially the thin functional layer, causing cracks and loss of waterproofing.
How to protect membranes from harmful UV effects?
Choose high-quality, certified materials with warranty.
Cover membranes quickly after installation to avoid prolonged sun exposure.
Does overall thickness affect the quality of a diffusion membrane?
No. Only the thickness of the functional layer affects durability. Overall thickness mainly determines mechanical strength.
What is the functional layer?
It is the active layer responsible for functionality: blocks water and wind, allows vapor passage.
What is the typical thickness of the functional layer in diffusion membranes?
Multi-layer membranes: 11–45 µm.
Tyvek membranes: two functional layers, 175–220 µm each.
Kõike polegi vaja ise teada. KKK
Vastused korduma kippuvatele küsimustele aluskatete ja tihendusteipide ja muude toodete kohta
What is the durability of diffusion membranes?
Studies (2018) show: standard multi-layer membranes last 6–9 years. Tyvek membranes remain functional for 20+ years. Study link
Should diffusion membranes be taped?
Yes. Taping ensures a continuous, airtight wall or roof structure. Insulation performs best when dry and sealed.
Can 200-micron polyethylene film be used for sealing?
No. Thickness in microns is irrelevant. Key parameter: Sd value (recommended ≥10–13 m). Also check:
a) CE certification
b) Airtightness tests
c) Durability (15–20 years warranty recommended)
d) Low elasticity (for proper installation)
e) Fire class (A2 class membranes now available).
Are all sealing tapes the same?
No. They differ in carrier layers and adhesive formulas. Since tapes are not CE-certified, choose branded products with ≥10 years warranty.
How to choose a quality vapor barrier membrane?
- Low elasticity
- CE and EN 13984 certification
- Fire resistance ≥ E class
- Temperature resistance –40 °C to +80 °C
- Zero air permeability (Bendtsen method)
- Durability after artificial aging.
How to choose a quality sealing tape?
Check:
- Versatility of application
- UV resistance
- Operating temperature range
- Warranty.
Are all flexible sealing foams the same
No. They differ in composition and technology. Example: DuPont Insta Stik Flex+ with patented technology, airtight, usable without inner tape (with DuPont DUO system). Only DuPont offers up to 25-year warranty for foams.
Can windows be sealed with mastic?
Yes. When choosing mastic, check:
- UV resistance (≥5–6 months)
- Paintability/plaster compatibility
- Airtightness
- Certification and durability tests
- Warranty.
Is smart vapor control suitable for my home? Will it let vapor through?
Yes, for standard residential houses it is ideal. Not suitable for very humid rooms (e.g. sauna, pool).
Are all reflective membranes the same?
No. For maximum benefit, choose products with:
- Sd value ≥1500 m
- Emissivity ≤0.05 (lower value = higher heat reflection, e.g. 0.05 = reflects up to 95% heat).